Sorry, you need to enable JavaScript to visit this website.
Skip to main content
Johnson and Johnson MedTech logo

Main navigation

  • Orthopedics
      Back
    • 1.3mm Locking System
    • Distal Femoral Osteotomy System
    • Double/Triple Pelvic Osteotomy Plates
    • LCP T-Plate 4.5 mm
    • LCP® SYSTEM 1.5 MM
    • Large Fragment System
    • Mini Fragment System
    • Pancarpal Arthrodesis Plate 2.7/3.5
    • Small Fragment System
    • Tibial Plateau Leveling Osteotomy System
    • Tibial Tuberosity Advancement (TTA) System
  • Online Ordering
  • Services
      Back
    • J&J Institute
  • About Us
      Back
    • Contact Us

Double/Triple Pelvic Osteotomy Plates

Double/Triple Pelvic Osteotomy Plates

The DePuy Synthes Double/Triple Pelvic Osteotomy (DPO/TPO) plate is part of a stainless-steel plate and screw system that merges locking screw technology with conventional plating techniques. The locking screws and an anatomical contour provide the ability to create a fixed‐angle construct while following familiar AO plating principles.

Contact Us
Instructions for Use

Instructions for use are found in the information that accompanied the product packaging.

Surgical Technique
Double/Triple Pelvic Osteotomy Plates
depuy synthes logo

Features & Benefits

LCP® Combi Holes

LCP® Combi Holes

The LCP Combi Hole accepts either cortex screws or locking screws. The cortex screw should be placed in the unthreaded portion of the locking Combi Hole in either a loaded or neutral position. Alternatively, a locking screw may be used in the threaded portion of the Combi Hole when indicated.

Stacked Combi Holes

Stacked Combi Holes

The stacked Combi Holes in the plate accept either cortex or locking screws. If locking screws are to be used in conjunction with cortex screws on the same side of the plate, the cortex screws must first be inserted and tightened.

Fixed angle stability

Fixed angle stability

The threads on the head of the locking screws lock into the threaded plate holes to form a fixed‐angle construct that will increase load transfer between the plate and bone. When compared to conventional plate‐and‐screw constructs, the angular and axial stability of locking screws increases the strength of the construct under load without requiring precise anatomical contouring.

The screw angles are optimized to target the strongest bone areas.

Anatomical contour

Anatomical contour

The anatomically shaped DPO/TPO plate is contoured to match the ilial shaft and allow clearance for the acetabular flare and the rectis femoris muscle origin. This will eliminate the need for plate contouring.

Plates are available in 20°, 25°, or 30° options, left or right.

Ability to perform a Double Pelvic Osteotomy using the same plate

Ability to perform a Double Pelvic Osteotomy using the same plate

The Double Pelvic Osteotomy procedure has a few additional benefits:

  • Ischium osteotomy no longer necessary
  • Fewer complications and lower morbidity rates vs. TPO.1

References

1. A.Vezzoni et al., Double pelvic osteotomy for the treatment of hip dysplasia in young dogs. Vet Comp Orthop Traumatol 2010; 23: 444--452 doi:10.3415/VCOT-10-03-0034.

Indication Statement

For product details such as indications, contraindications, warnings and precautions please consult the Surgical Technique.

116829-190617

© DePuy Synthes Companies 2021. All Rights Reserved.
This site is published by the DePuy Synthes Companies, which are solely responsible for its content.
This site is for visitors from Europe, Middle East and Africa.
The third party trademarks used herein are trademarks of their respective owners.

J&J MedTech logo
  • TWITTER Created with Sketch.
  • LINKEDIN Created with Sketch.
  • Legal Notice

All contents © Medical Devices Business Services, Inc. 2020. All Rights Reserved

You are about to leave the Johnson & Johnson Medical Devices website and go to an external website.

Yes, Continue to External Site No, Stay Here